Dynamic, Static and Mobile DR: Comparing System Formats and Configuration Questions

Describe the System Format First

Dynamic, static, and mobile DR information concerns structure and workspace. State whether the equipment is fixed, cart-based, suspended, or portable, along with site and mobility needs; these descriptions do not establish image-quality rankings. Then check the generator, tube, detector, workstation, and software for the exact model instead of combining components from different series into an invented configuration.

Read the Dynamic System Components

The VET-520 dynamic DR information lists a dynamic high-voltage generator, X-ray tube, flat-panel detector, radiography table, and image acquisition and processing workstation. Software includes case management, image acquisition and processing, and veterinary imaging measurement tools. Map the main components and workstation, then tie each item to its model and list. Do not fill a missing specification with a value from another model.

Read Static and Mobile Fields

VET-580 static DR lists a flat-panel detector, high-voltage generator, collimator, and digital imaging workstation; software includes image processing, veterinary measurement, and case-report editing. Its stated specifications include 32 kW, 40–125 kV, 400 mA, a 17 × 17 inch detector, 2816 × 2816 matrix, 154 μm pixel pitch, 3.3 lp/mm, and 16-bit/AED. The VET-560 portable model lists 43 × 43 cm, 3072 × 3072, an amorphous-silicon cesium-iodide detector, 210 W/350 W customizable upgrade, 3.5 mA, and 70 kV; its software includes patient management, area selection, preview, processing, and annotation.

A component list explains system modules but alone cannot determine site fit, image performance, or workflow suitability. If a decision depends on interfaces, table, mobile base, or software features, ask about each item and request formal information for the exact model.

Models in one series may share modules yet differ in generator, detector, workstation, and optional accessories. Record the full model and selected configuration, separating customization from base specifications to compare actual proposals.

System-Format Checklist

• Confirm dynamic, static, or mobile structure and the VET model.

• Check the generator, tube, detector, and workstation for that model.

• Keep units, matrix, software features, and customization fields intact.

• Discuss cart, suspended, portable, and C-arm formats as structures, not image-quality rankings.